text.skipToContent text.skipToNavigation
product image
close icon
plus icon
Areas of application
Doors
Furniture construction & interior fitting
Product features
Suitable for contact with food
Variety of decors and textures
Easy care
Anti-fingerprint

Areas of application

Attractive surface material, appropriate for surface and edge applications providing the high-performance features of the well-known Duropal HPL products. Duropal XTreme may be used vertically as well as horizontally.

Certificates

  • FSC certificate

    FSC certificate

    The FSC trademarks on wood and wood products stand for transparency and credibility worldwide. They ensure that people and nature are treated fairly and responsibly and can be found on a constantly growing range of products worldwide.

  • PEFC certified

    PEFC certified

    PEFC is the largest institution for ensuring and marketing sustainable forest management through an independent certification system. Wood and wood products with the PEFC seal originate demonstrably from ecologically, economically and socially sustainable forestry.

Awards

Formats

Length (mm)Width (mm)Thickness (mm)Textures
410013000,8XM

Product features

Product standard

  • Produced acc. to EN 438-3

Density

  • Min. 1,350 kg/m³

Reaction to fire

  • Normally flammable
  • Euroclass D-s2,d0 or worse in connection with normally and easily inflammable core boards. (EN 13501-1, CWFT acc. to 2003/593/EG)

Formaldehyde emission class

  • E1 (EN 717-1)

Product safety

  • The surface is physiologically safe, and approved for direct contact with food acc. to Regulation (EU) No. 10/2011.
  • We manufacture the panels without the use of halogens, heavy metals, preservatives, wood protectors or organic solvents.
  • This product follows the REACH regulation EC 1907/2006 an article. Following Article 7 it does not need to be registered.

Special

  • FSC®-certification (license code: FSC-C011773) or PEFC-certification (license code: PEFC/04-32-0828) - available on request.
  • For decors, see Duropal XTreme HPL stock collection. Other decors possible on request.

Product handling

Processing

  • For the production of flat-bonded panels we recommend a symmetric construction. This means both sides should be identical HPL. If backing material (also HPL) is used, there is a risk of bowing.
  • Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be at the normal climatic conditions in which the material will later be used.
  • Especially for large applications, we recommend paying attention to the colour and texture unifomity of the boards and cut products used when further processing and installing and that the production direction is taken into account.
  • We recommend carrying out your own tests depending on the respective application and material requirement.
  • For further information, please refer to our "Duropal XTreme” use and cleaning recommendation.

Machines and tools

  • Can be worked with carbide (HW) or diamond (DP) tipped tools on conventional woodworking machines.
  • For further information, please refer to our "Duropal XTreme” use and cleaning recommendation.

Edging

  • Can be worked with carbide (HW) or diamond (DP) tipped tools on conventional woodworking machines.
  • For further information, please refer to our "Duropal XTreme” use and cleaning recommendation.

Storage, handling and transport

  • The material must be stored flat, level and horizontal on clean surfaces at normal climatic conditions (Temperature 18–25 °C, relative humidity 50–65 %).
  • Protect from moisture and wet conditions.
  • Avoid direct exposure to heat and any possible dehydration of the surfaces by light- or heat radiation or by air currents from heating- or air conditioning systems.
  • Avoid exposure to direct sunshine or UV rays, especially of products covered in film.
  • The stack must be weighed-down with a cover panel.
  • These storage conditions must continue to be ensured after removing panels from the stack.
  • Vertical storage is not recommended.
  • Please note that incorrect storage, regardless of its duration, may cause irreversible distortion to the sheets.
  • Foreign bodies or impurities in the pallet of sheets can lead to impressions and damage to the surface of the board.
  • Sheets / boards must not be moved against each other ; they should be moved individually by hand or with suction equipment.
  • Ensure that sufficiently large and sturdy bases, e.g. pallets, are used for the transportation of stacked sheets. The sheets on the pallet must be secured against slipping.
  • To protect the high-quality surface Pfleiderer delivers Duropal XTreme with a protective foil.

Health and safety

  • Please wear the appropriate personal protective equipment (PPE) when processing and handling.
  • Provide adequate extraction when splitting/sanding.

You like to learn more?

Please get in touch with us! We are looking forward to hearing from you.
Product enquiries and sales department